|
|
Technical specifications
| Technical specifications |
| Workspindle dia |
mm |
130 |
| Spindle taper |
ISO 50 |
| Spindle speed range - R headstock |
RPM |
10 - 3 000 |
| Spindle speed range - N headstock |
RPM |
10 - 1 500 |
Spindle speed range
- non traveling spindle |
RPM |
10 - 5 000 |
| Main motor power (non traveling spindle) |
kW |
37 (28) |
| Table cross travel X |
mm |
2 000, 3 500, 4 000,
5 000 |
| Headstock vertical travel Y |
mm |
2 000, 2 500, 3 000 |
| Column longitudinal travel Z |
mm |
1 250, 1 600, 2 000 |
| Spindle stroke W |
mm |
800 |
| Feeds X, Y, Z, W |
mm.min-1 |
4 - 5 000 |
| Rapid traverse |
| - X = 2 000, 3 500 mm (S12) |
mm.min-1 |
10 000 |
| - X = 2 000, 3 500 mm (S20) |
mm.min-1 |
8 000 |
| - X = 4 000, 5 000 mm |
mm.min-1 |
8 000 |
| - Y, Z, W |
mm.min-1 |
10 000 |
| - B S12 (S20) |
min-1 |
2 (1,5) |
Maximum height of the spindle above the rotary table
|
mm |
0 |
| Maximum workpiece weight (S12 / S20) |
kg |
12 000 / 20 000 |
| Table clamping surface |
mm |
1 800 x 1 800,
1 800 x 2 200,
1 800 x 2 500 |
| Table T-slots |
| - dimension |
mm |
22H8 |
| - pitch |
mm |
160 |
| - quantity |
|
11 |
| |
| Farther specification |
| Operator lift vertical/horizontal travel |
mm |
1 600, 2 300 / 600 |
| Hydraulic circuits operational pressure |
MPa |
6,5 - 7,2 |
| Compressed air source output requirements |
| - pressure |
MPa |
0,6 |
| - volume |
l.sec-1 |
18 |
| Mains voltage / frequency |
V / Hz |
3 x 400/50,
3 x 400/60 |
| Control voltage |
V |
24 |
| Total power consumption |
kVA |
82 |
| Noise level "A" at the operator site max. |
dB(A) |
80 |
| Total machine weight |
kg |
according to model setup |
| |
| Automatic tool change (ATC) equipment |
| Quantity of pockets in magazine |
40, 60, 80, 120 |
| Pitch of pockets in magazine |
mm |
130 |
| Tool dia max. |
| - full magazine |
mm |
125 - 150 |
| - adjacent pockets free |
mm |
320 |
| Dia max. of a special flat tool |
mm |
390 (600) |
| Tool length max. |
mm |
500 |
| Tool weight max. |
kg |
25 |
| Total weight of tools in magazine |
kg |
750 |
| Imbalance of tools in magazine max. |
kg |
150 |
| Tool change time |
sec |
20 |
|
|
