|
|
Technical specifications
| Technical specifications |
| Workspindle dia (headstock N/R) |
mm |
112 (headstock N),
125 (headstock R) |
| Spindle taper |
ISO 50 |
| Spindle speed range |
RPM |
10 - 2 800 (N),
10 - 3 300 (R) |
| Main motor power |
kW |
37 |
| Table cross travel X |
| rotary table or pallet |
mm |
1 600, 2 000, 2 500 |
| Headstock vertical travel Y |
| - machine with the standard table |
mm |
1 250, 1 400, 1 600 |
| - machine with the pallet (APC equipped) |
mm |
1 120, 1 250, 1 400 |
| Column longitudinal travel Z |
mm |
800, 1 000, 1 250 |
| Spindle stroke W |
mm |
710 (headstock N),
500 (headstock R) |
| Feeds |
| - X, Y, Z, W |
mm.min-1 |
1 - 6 000 |
| - B |
min-1 |
0,003 - 1,5 |
| Rapid traverse |
| - X, Y, Z, W |
mm.min-1 |
10 000 |
| - B |
min-1 |
2,5 |
| Minimum height of the spindle axis |
| - above the standard rotary table |
mm |
50 |
| - above the pallet |
mm |
0 |
| Maximum workpiece weight |
| - design with rotary table |
kg |
8 000 |
| - design with pallet |
kg |
5 000 |
| Table clamping surface |
mm |
1 250 x 1 400,
1 400 x 1 600 |
Pallet clamping surface
|
mm |
1 250 x 1 400,
1 250 x 1 600 |
| Table T-slots |
| - dimension |
mm |
22H8 |
| - pitch |
mm |
160 |
| - quantity |
9 |
| |
| Farther specification |
| Operator lift vertical/horizontal travel |
mm |
1600 / 600 |
| Hydraulic circuits operational pressure |
MPa |
6,5 - 8 |
| Compressed air source output requirements |
| - pressure |
MPa |
0,6 |
| - volume |
l.sec-1 |
18 |
| Mains voltage / frequency |
V / Hz |
3 x 400 / 50,
3 x 400 / 60 |
| Total power consumption |
kVA |
83 |
| Machine weight |
kg |
according to model setup |
|
Noise level "A" at the operator site max
|
dB (A) |
80 |
| |
| Automatic tool change (ATC) equipment |
| Quantity of pockets in magazine |
| - on the column |
40, 60 |
| - next to the column |
80, 120 |
| Pitch of pockets in magazine |
mm |
130 |
| Tool dia max. |
| - full magazine |
mm |
125 - 150 |
| - adjacent pockets free |
mm |
320 |
| Dia max. of a special flat tool |
mm |
390 (600) |
| Tool length max. |
mm |
500 |
| Tool weight max. |
kg |
25 |
| Total weight of tools in magazine |
kg |
750 |
| Imbalance of tools in magazine max. |
kg |
150 |
| Tool change time |
sec |
20 |
| |
| Automatic pallet change (APC) equipment |
|
Quantity of pallets (including those on the pallet stations) in the system
|
2 |
| Maximum workpiece weight |
kg |
5 000 |
| Pallet clamping surface |
mm |
1 250 x 1 400,
1 250 x 1 600 |
| Pallet T-slots |
| - dimension |
mm |
22H8 |
| - pitch |
mm |
160 |
| - quality |
9 |
| Total pallet change time |
sec |
85 |
|
|
